Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 280)

Appendix
C
Publication 2706-817
Configuration Software Error
and Warning Messages
This appendix lists messages that may appear while creating or
editing an application. Messages are listed alphabetically.
For messages that may appear during validation, see Appendix D.
For messages that may appear during a download, see Appendix E.
For messages that may appear during a tag import or export, see
Page 8–22.
Message Meaning What to do
AB Utilities error creating project
The project could not be created. Cause
could be a full disk or a write-protected
network partition. Check available disk space.
Verify the computer’s write privileges if it is on
a network.
AB Utilities failed to initialize
MessageBuilder could not initialize Utilities
during startup because SHARE.EXE is not
running.
MessageBuilder installation should add
SHARE.EXE to the AUTOEXEC.BAT file. See
the RELEASE.TXT file in C:\AB for more
details.
Cannot delete project associated with current
application. The project belonging to the current
application cannot be deleted. Reassign the current application to another
project, then delete the project.
Cannot find desired terminal in Terminal
catalog.
The CATALOG.DAT file is missing or
corrupted. This file stores the terminal type
that is selected when creating a new
application or changing the application to fit a
different terminal type.
Contact A-B technical support.
Cannot find or cannot load the Application File
Transfer Utility.
The WINMFT.EXE executable failed to load.
Verify that WINMFT.EXE is in the same
directory as MBWIN.EXE. If it is not there,
reload the file from the installation disk.
Cannot initialize print device. Printer could not be initialized. Check the Print Setup settings and try again.
Cannot load the data for tag: [tag name]. Internal error.
Check tag information. Contact A-B technical
support if error continues.
Cannot locate tag: [tag name]. Internal error.
Check tag information. Contact A-B technical
support if error continues.
Cannot parse address for tag: [tag name]. Internal error.
Check tag information. Contact A-B technical
support if error continues.
Cannot perform terminal conversion. The
following message(s) have function keys
enabled: Message(s): [number], [number] ...
The application is being converted to a
Terminal that does not have Function Keys.
One or more messages has Function Keys
Enabled.
Remove all the messages that have Function
Keys enabled from the Application.
ББББББББББББ
Б ББББББББББ Б
Б ББББББББББ Б
ББББББББББББ
Cannot perform terminal conversion. The
following message(s) have Numeric Variable
Entry fields: Message(s): [number], [number]
...
БББББББББББ
Б БББББББББ Б
Б БББББББББ Б
БББББББББББ
Attempting to convert an application from a
421N or 421F terminal to a 421D terminal.
ББББББББББББ
Б ББББББББББ Б
Б ББББББББББ Б
ББББББББББББ
Remove Numeric Entry variables from all
messages listed.
ББББББББББББ
Б ББББББББББ Б
Б ББББББББББ Б
ББББББББББББ
Cannot perform terminal conversion. The
following message(s) have ASCII Variable
Entry fields: Message(s): [number], [number]
...
БББББББББББ
Б БББББББББ Б
Б БББББББББ Б
БББББББББББ
Attempting to convert an application from a
terminal with a daughterboard to one without
a daughterboard.
ББББББББББББ
Б ББББББББББ Б
Б ББББББББББ Б
ББББББББББББ
Remove ASCII Entry variables from all
messages listed.