Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 191)

8–14 Working with Tags
Publication 2706-817
Other information
•
The column width of the printed output is based on the column
width in the Tag Editor.
•
The Tag Editor prints as many columns as fit on the width of the
page (minus the margins). If a column does not fit, it is printed on
the next page.
The Tag Editor does not print a column that is less than one
character wide, that is, an empty column.
•
If a row does not fit on the page, it is printed on the next page
(each row is one text line high).
To set up the printer:
1. Select the Printer Setup button in the Print dialog to open the
standard Windows Print Setup dialog.
The dialog entries are based on the computer’s system
configuration and installation options.
2. Select the default or another printer and specify its settings.
!
ATTENTION: Check the Microsoft Windows user
manual to make sure the settings are correct for the
type of printer.
3. Select the Options button to open a dialog to fine-tune the
specific printer. This dialog is different for each type of printer.
4. Select OK to return to the Print dialog.
If the printer is not listed:
1. Check for hardware compatibility between the printer and one of
the printers listed.
2. Check if your printer has an emulation mode that is compatible
with one of the printers listed.
3. It may be necessary to install a printer driver for your printer.
Refer to the Windows User’s Guide.