Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 27)

2–10 Installing MessageBuilder Software
Publication 2706-817
To configure an existing INTERCHANGE driver:
1. Select the driver from the Configured Devices: list.
2. Select the Edit Device button to open the configuration dialog for
the selected driver.
3. Edit parameters and select OK when done.
4. Reboot your computer to load the driver and its configuration.
To remove a current driver:
1. Select a driver from the Configured Devices: list.
2. Select the Remove Device button.
3. A dialog asks for confirmation of the removal. Choose OK.
4. Reboot your computer to unload the driver.
To specify advanced parameters for drivers:
1. Select the Advanced button from the INTERCHANGE Device
Configuration dialog.
2. Modify the settings as needed. See below.
3. Select the OK button to save the settings
Or select the Cancel button to return to the Configuration menu
without changing the parameters.