Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 227)

10–19 Terminal and Communication Setup
Publication 2706-817
To select the time or date format used by the terminal:
1. Select the Time/Date tab from the Terminal Setup dialog.
2. Set the Date Format and the Time Format as required.
3. Select the OK button to save all the settings from the Terminal
Setup dialog and return to the main Message Editor Table View.
Or select another tab and continue setting up the terminal for the
application.
Or select the Cancel button to return to the Message Editor Table
View without saving any Terminal Setup settings.