Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 295)

Validation Error Messages D–13
Publication 2706-817
Message What to do Meaning
Validation Tags: PLC/Scanner
communications port not defined. The PLC/Scanner with which the terminal
communicates is not defined.
Use the Terminal Setup Communication
Setup dialog to configure the PLC/Scanner
type and name.
Value Trigger Priority mismatch with
undefined Value Triggered Messages.
There is no Value Trigger tag defined for the
application; however the Trigger Priority is set
to Value.
Use the Trigger Priority control on the
Terminal Setup/Advanced dialog to change
the priority to Bit, or use the Terminal
Setup/Control Tags dialog to define a Value
Trigger tag.
With line attribute “All” message won’t fit on
display.
The All Line message contains more
displayable characters than the display can
show.
Reformat the message with fewer characters
or change the text size.