Rockwell Automation 2706-MB1 MESSAGEVIEW 421 SOFTWARE MANUAL - Manual (Page 242)

11–6 Validating Applications and Transferring Files
Publication 2706-817
An application may be downloaded to a MessageView terminal using
the Application menu Download command.
Before downloading an application: 104
•
DF1 INTERCHANGE communication driver must be installed
and loaded on the computer. See Page 2–3.
•
Driver communication parameters must be checked using the
Workstation Setup command on the File menu. See Page 2–7.
•
Cable connections must be correct. See the MessageView
Terminal User Manual (Publication 2706-816) for details.
•
The MessageView terminal must have its RS-232 port set to
MessageBuilder communication parameters. See Page 5–3 for
an example of how to switch settings.
To download an application to a MessageView terminal:
1. Open the application to be downloaded.
2. Select the Download tool to open the Download Application
dialog.
Or choose Download from the Application menu.
Appears only if DF1
INTERCHANGE
driver installed
Shows drivers
currently loaded.
3. Under Destination, select Operator Terminal.
Downloading an
Application to a Terminal