Rockwell Automation Logix5000 Control System: Connect Kinetix 350 Drives over an EtherNet/IP Network Quick Start - Manual (Page 36)

36 Rockwell Automation Publication IASIMP-QS032A-EN-P - March 2012
Chapter 2 Add a Kinetix 350 Drive to an RSLogix 5000 Project
8. From the Electronic Keying
pull-down menu, choose
Disable Keying.
9. Click OK twice to close the Module Definition dialog box and the Module Properties
dialog box successively.
10. Right-click the 2097-V31PR2-LM
drive and choose Properties.
The Module Properties dialog
box opens.
11. Click the Associated Axes tab.
12. Click New Axis.
The New Tag dialog box opens.
IMPORTANT The Disable Keying
selection ensures that
you will easily complete
the taks. In typical
applications, we
recommend you avoid
using Disable Keying
whenever possible.