Rockwell Automation Logix5000 Control System: Connect Kinetix 350 Drives over an EtherNet/IP Network Quick Start - Manual (Page 43)

Rockwell Automation Publication IASIMP-QS032A-EN-P - March 2012 43
Add a Kinetix 350 Drive to an RSLogix 5000 Project Chapter 2
Axis Off One of the following conditions exists:
• Off
• Initialization is in process - Bus not operating
• Shutdown is in process - Bus not operating
• Pre-charge is in process - Bus not operating
Flashing red/green Self-test (power-up diagnostics) in process
Flashing green One of the following conditions exists:
• Initialization is in process- Bus is operating
• Axis is stopped.
Flashing amber One of the following conditions exists:
• Shutdown is in process - Bus is operating
• Start is inhibited.
Steady green One of the following conditions exists:
• Axis is stopping.
• Axis is starting.
• Axis is running.
• Axis is testing.
Flashing red One of the following conditions exists:
• Axis is aborting.
• Axis experienced a major fault.
Steady red One of the following conditions exists:
• Axis is aborting.
• Axis experienced a major fault.
Table 2 - Drive Status Indicators
Status Indicator Condition Status