Rockwell Automation Logix5000 Control System: Connect Kinetix 350 Drives over an EtherNet/IP Network Quick Start - Manual (Page 7)

Rockwell Automation Publication IASIMP-QS032A-EN-P - March 2012 7
Preface
Configure the
networks Complete required tasks associated with the networks used in your application, such as assigning an IP address
to the controller’s communication port or communication module in your Logix5000 control system.
Create an
RSLogix 5000 project Create a project to be used with your Logix5000 controller. A project includes all desired control system
components and necessary programming. For example, add ladder logic to test tasks associated with individual
system components.
Table 1 - Required Tasks to Complete before Using This Quick Start
Task Description