Where to start – Rockwell Automation Logix5000 Control System: Connect Kinetix 350 Drives over an EtherNet/IP Network Quick Start User Manual
Page 9
Advertising
![background image](/manuals/581044/9/background.png)
Rockwell Automation Publication IASIMP-QS032A-EN-P - March 2012
9
Preface
Where to Start
Prerequisite Tasks
Described in
Before Using This Publication on page 5
.
1. Prepare the Logix5000 control system hardware
2. Prepare the computer
3. Configure the networks
4. Create an RSLogix 5000 project
Logix5000
Controller
Advertising