Rockwell Automation 20B PowerFlex 70, PowerFlex 700 Reference Manual - Manual (Page 186)

Start-Up
186 Rockwell Automation Publication PFLEX-RM001H-EN-P - June 2013
Figure 48 PowerFlex 700 Vector Control Option Startup
Flux Vector Start Up (Top Level)
Main Menu:
<Diagnostics>
Parameter
Device Select
Memory Storage
Start-Up
Preferences
No
PowerFlex 700
Start-Up .
Complete these
steps in order:
<
1.Motor Control>
2.Motr Data/Ramp
3.Motor Tests
4.Speed Limits
5.Speed/Trq Cntl
6.Start/Stop/I/O
7.Appl Features
8.Done/Exit
0-0
PowerFlex 700
Start-Up .
Make a selection
Abort
<Backup>
Resume
Start-Up Menu
Resume/Esc
0-3
HIM
Done/Exit
(allow Start/Jog)
Go to 3-0
Go to 5-0
Go to 6-0
Motor Dat/Ramp
Strt/Stop/ I/O
Speed Limits
Go to previous
state
Go to Backup
screen for previous
state
Backup
'Esc' key
Go to 4-0
Motor Tests
Go to 2-0
Go to 7-0
Speed/Torque Control
PowerFlex 700
Start-Up .
Startup consists
of several steps
to configure a
drive for basic
applications.
0-1
PowerFlex 700
Start-Up .
The drive must
be stopped to
proceed. Press
ESC to cancel.
0-2
Drive
active?
Start-Up/Restart
(disallow Start/Jog)
Yes
Abort
(allow Start/Jog)
Esc
(allow Start/Jog) Any state
(except 0-2)
Backup
Drive
active?
No
Drive
active?
Start-Up/Continue
(disallow Start/Jog)
Yes
Go to Abort-
Resume state
No
Yes
Startup
Menu
Appl Features
First time
into
Startup??
Go to 1-1 (Motor
Control)
Yes
No
Go to 1-0
Motor Control
STOP
(Stops the Drive)
PowerFlex 700
Start-Up .
Make a selection
<1.SMART>
2.Basic
3.Detailed
4.More Info
Select:
<English>
Francais
Espanol
Deustch
Italiano For first time powerup...
Basic/
Detailed
Go to 8-1 (SMART
Start)
SMART
Go to HIM
Main Menu
Done/Exit
0-4 PowerFlex 700
Start-Up .
SMART startup
programs 11 key
drive parameters
for fast setup .
Basic startup
programs basic
drive functions
and options. .
Detailed startup
programs motor
data, reference;
ramps; limits; &
analog/digital
I/O.
0-5
PowerFlex 700
Start-Up .
Complete these
steps in order:
<
1.Motor Control>
2.Motr Data/Ramp
3.Motor Tests
4.Speed Limits
5.Speed/Trq Cntl
6.Start/Stop/I/O
7.Done/Exit
0-1
Basic Detailed