Rockwell Automation 20B PowerFlex 70, PowerFlex 700 Reference Manual - Manual (Page 9)

Rockwell Automation Publication PFLEX-RM001H-EN-P - June 2013 9
Chapter
1
Preface
The purpose of this manual is to provide detailed drive information including
operation, parameter descriptions and programming.
Manual Conventions To help differentiate parameter names and LCD display text from other text, the
following conventions will be used:
•
Parameter Names will appear in [brackets]. For example: [DC Bus Voltage].
•
Display Text will appear in “quotes.” For example: “Enabled.”
•
The following words are used throughout the manual to describe an action:
•
The following symbols are used throughout the manual to indicate specific
drive imformation.
Word Meaning
Can Possible, able to do something
Cannot Not possible, not able to do something
May Permitted, allowed
Must Unavoidable, you must do this
Shall Required and necessary
Should Recommended
Should Not Not recommended
Symbol Description
Indicates that the information presented is specific to the Standard Control Option
This information only applies to PowerFlex 700 drives with the Vector Control option
Applies to PowerFlex 700 drives with [Motor Cntl Sel] set to “FVC Vector.”
Indicates that the information presented is specific to the PowerFlex 70 Enhanced Control
Option.
Standard
Vector
Vector FV
E C