Filtering – Rockwell Automation 20B PowerFlex 70, PowerFlex 700 Reference Manual User Manual

Page 34

Advertising
background image

Analog Outputs

34

Rockwell Automation Publication PFLEX-RM001H-EN-P - June 2013

Filtering

Software filtering will be performed on the analog outputs for certain signal
sources, as specified in

Table 1

. “Filter A” is one possible such filter, and it is

described later in this section. Any software filtering is in addition to any
hardware filtering and sampling delays.

Table 1 Software Filters

Analog output software filters are specified in terms of the time it will take the
output of the filter to move from 0% to various higher levels, given an
instantaneous step in the filter input from 0% to 100%. The numbers describing
filters in this document should be considered approximate; the actual values will
depend on implementation.

Filter A is a single pole digital filter with a 162ms time constant. Given a 0% to
100% step input from a steady state, the output of Filter A will take 500ms to get
to 95% of maximum, 810 ms to get to 99%, and 910 ms to get to 100%.

PowerFlex 700 Firmware 3.001 (& later) Enhancements

Certain analog output enhancements have been included in firmware version
3.001 (and later) for the PowerFlex 700 Vector Control drive. These include:

Ability to scale the analog outputs

Connect scale blocks to the analog outputs

Analog Output controlled via Datalink

Output Scaling
A new scaling feature has been added to allow scaling. Prior to this feature,
[Analog Outx Lo] and [Analog Outx Hi] limited only the voltage. This voltage
range was scaled to the selected option range listed in [Analog Outx Sel]. With
the new feature, [Analog Outx Lo] and [Analog Outx Hi] still set the voltage
range, but the scaling parameter now scales the range of the [Analog Outx Sel]
selection. See the following example.

Quantity

Filter

Output Frequency

No extra filtering

Commanded Frequency

No extra filtering

Output Current

Filter A

Output Torque Current

Filter A

Output Flux Current

Filter A

Output Power

Filter A

Output Voltage

No extra filtering

DC Bus Voltage

Filter A

PI Reference

No extra filtering

PI Feedback

No extra filtering

PI Error

No extra filtering

PI Output

No extra filtering

Advertising
This manual is related to the following products: