EVCO c-pro nano CHIL - Manual (Page 137)

C-PRO NANO CHIL AND C-PRO MICRO CHIL – APPLICATION MANUAL
Pag. 137
8 List of Modbus ® Variables
The application can be controlled via a supervisor, using the Modbus
®
protocol. Communication
takes place via an RS485 serial interface, which is already incorporated into the controller.
The various statuses/parameters exported by the application are listed below.
ID Name Value
Min.
Max. Description Mode
257 Packed_DI 0 0 65535
bit00=DI01,
bit01=DI02,
bit02=DI03,
bit03=DI04,
bit04=DI05,
bit05=DI06,
bit06=DI07,
bit07=DI08,
bit08=DI09,
bit09=DI10,
bit10=DI11,
bit11=DI12
R/W
385 Packed_DO 0 0 65535
bit00=DO01,
bit01=DO02,
bit02=DO03,
bit03=DO04,
bit04=DO05,
bit05=DO06,
bit06=DO07,
bit07=DO08,
bit08=DO09,
bit09=DO10,
bit10=DO11,
bit11=DO12
R/W
513 AI1_TempIngresso - - - R/W
514 AI2_TempUscita_C1 - - - R/W
515 AI3_Pressione_C1 - - - R/W
516 SondaEvaporazioneC1 - - - R/W
517 AI6_TempUscita_C2 - - - R/W
518 AI7_Pressione_C2 - - - R/W
519 SondaEvaporazione_C2 - - - R/W
520 SondaEsterna - - - R/W
521 SondaAccumulo - - - R/W
641 Inverter_Fan_C1 0.00 0.00 100.00 R/W
642 Inverter_Fan_C2 0.00 0.00 100.00 R/W
643 ventilatoreFC 0.00 0.00 100.00 R/W
644 valvolaFC 0.00 0.00 100.00 R/W
769 PackedAlarm1 0 0 65535
bit00=AL01,
bit01=AL02,
R/W