EVCO c-pro nano CHIL - Manual (Page 54)

C-PRO NANO CHIL AND C-PRO MICRO CHIL – APPLICATION MANUAL
Pag. 54
C2-9 12 V AC (power
supply) Instrument power supply (12 V AC/DC)
C2-10 12 V DC Power supply for current transducers and EVCO’s EVDFAN1 phase-cut
module (12 V DC)
C2-11 AO4 Output for EVCO’s EVDFAN1 phase-cut module
C2-12 DI11 Digital input # 11
C2-13 DI10 Digital input # 10
C2-14 DI9 Digital input # 9
C2-15 DI8 Digital input # 8
C2-16 DI7 Digital input # 7
To enable the use of the EVDFAN1 phase-cut module, the expansion must be powered by an alternating
current supply; the expansion’s powering phase must be the same one that supplies the module.
Connector 3 : Connector for the controller
Conn. Label Description
C3-1 12 V DC Power supply (12 V DC, 50 mA max.)
C3-2 GND Common
C3-3 SERIAL EVCO live serial port
The power supplies of the controller and the expansion must be galvanically isolated from each other.