EVCO c-pro nano CHIL - Manual (Page 68)

C-PRO NANO CHIL AND C-PRO MICRO CHIL – APPLICATION MANUAL
Pag. 68
5 Parameter List
All parameters managed by the application are listed below. Each parameter is accompanied by a
brief description, the range of its admissible values, units of measure, the assigned default value and
the menu containing the parameter. Menu are structured on the basis of the following logic:
⋅
UT : User menu
⋅
MA: Maintenance operator menu
o MA-F: Operation branch maintenance menu
o MA-M: Manual branch maintenance menu
o MA-CA: Calibration branch maintenance menu
o MA-IO: Input/output branch maintenance menu
⋅
IS : Installation operator menu
o IS-R: Regulation branch installation menu
o IS-C: Compressor branch installation menu
o IS-F: Condensing fan branch installation menu
o IS-D: Defrosting branch installation menu
o IS-P: Pump branch installation menu
o IS-A: Anti-frost branch installation menu
o IS-FC: Free-cooling branch installation menu
o IS-S: Protection device branch installation menu
o IS-V: Various parameter branch installation menu
⋅
CO : Constructor menu
o CO-W: Plant branch construction menu
o CO-Hw: Hardware branch construction menu
o CO-Pa: Parameter branch installation menu