EVCO c-pro nano CHIL - Manual (Page 65)

C-PRO NANO CHIL AND C-PRO MICRO CHIL – APPLICATION MANUAL
Pag. 65
In the OPERATION menu, it is possible to view/enable the features relating to the operation of
compressors, fans and pumps. Some examples of these are the hours of operation, the enabling of
the corresponding alarm and the threshold of maximum allowable hours.
In the MANUAL menu, it is possible to set to manual/automatic operation compressors and fans,
whose outputs can be forced, in order to test their functionality.
In the CALIBRATION menu, it is possible to set the corrections to be applied to analogue inputs, to
compensate the offsets due to cabling and probe positioning.
In the I/O STATUS menu, it is possible to view directly the card’s physical inputs and outputs.
Installation Operator Menu
The installation operator menu is a Level 3 menu, i.e. it requires entering of the installation operator
level (or higher) password, in order to be able to display/modify the parameters contained in this
branch.
CoMP (COMPRESSORS menu)
rEG (REGULATION menu)
Cond (CONDENSATION menu)
dEFr (DEFROSTING menu)
PuMP (PUMPS menu)
A-Fr (ANTI-FROST menu)
F-C (FREE-COOLING menu)
SEcu (SAFETY DEVICES menu)
PAr (VARIOUS PARAMETERS menu)
MAP (PARAMETER MAPS menu)
PSd3 (INSTALLATION OPERATOR password)
The installation operator menu contains all the parameters connected with the configuration of all
functionalities (alarms, settings, logic, rotation type, etc.) of the machine.
In the COMPRESSORS menu, it is possible to set the parameters connected with the management of
devices:
⋅
rotation
⋅
timings
⋅
maximum number of start-ups.
In the REGULATIONS menu, it is possible to set the parameters connected with lateral-band and
neutral-zone thermal regulation of compressors.
In the CONDENSATION menu, it is possible to set the parameters connected with the control of
condensation pressure, via the fans.
In the PUMPS menu, it is possible to set the parameters connected with operation and protection of
pumps.
In the DEFROSTING menu, it is possible to set the parameters connected with the activation and
duration of heat pump defrosting.