SINGER XL100 Quantum User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
►• c»» 1^. *V>- *-vi s,..*jfj*, .
Turn handwheel,
__ counterclockwise to
Q raise needle to high
est position.
10
D.
Release needle threader.
Pull loop of thread that is at
back of the needle out about
E. 4".
Pulling up Bobbin
Thread
Hold needle thread lightly with left
hand and turn handwheel
counterclockwise until needle
A.
enters needle plate.
Continue turning handwheel while holding
needle thread until needle rises.
Tighten hoid on needle thread
B.
until bobbin thread is pulied up.
Undo loop with fingers.
Pull both needle and bobbin
threads out about 4" and pass
them under presser foot to back of
C.
machine.
-J
Caution:
1. Do not lower threading lever while sewing
machine is in operation.
2. Automatic needle threader will not work on
twin needles or wing needles.
13