SINGER XL100 Quantum - Manual (Page 64)

Example (combination of sampler and upper/lower case script).
Follow steps of procedure in numerical
order.
1. Turn off power to machine. Put
embroidery bed on machine. (See
page 54.)
2. Determine location of pattern to be
sewn and draw a reference marker
line on material with assistant marker.
3. Secure material In embroidery frame. (See page 56.)
4. Insert sampler embroidery card ^.T/'1 Into slot on
machine. i
5. Install embroidery frame on embroidery bed.
6 . Turn on power to machine.
7. Raise needle and embroidery presser foot.
8 . Select pattern
9. Press multi key.
Multi-color No.1 Blue/green
2 Gold
3 Light green
4 Purple
10. Determine center of pattern using key.
11. Check sewing area using key.
12. Place blue/green needle thread In position, and lower
presser foot.
13. Start sewing machine. After completion of part of pattern
which is embroidered with blue/green needle thread,
machine will stop and cut thread.
14. Follow steps 12 and 13 to finish other colors In grape
pattern.
15. After completion of sewing grape pattern, turn OFF power
to machine.
16. Remove sampler embroidery card.
17. Insert slot letter embroidery card
machine.
18. Turn on power to machine.
19. Press key. ( ^ )
20. Press
into slot on
21. Press
22. Press
8-^
u
button.
key twice. ( 0t)
key to change upper case to lower case
letter. ( ^ )
23. Press
24. Press
25. Press
26. Press
27. Press
28. Press
29. Press
button,
key. ( €1^ )
button,
key twice. (
button.
■apl key. ( « )
button.
30. Determine center of letters using key.
31. Check sewing area using | w ^ m | key.
32. Thread needle with desired color.
33. Start sewing machine.
62