Enlarge pattern, Reduce pattern, 4» mirror pattern – SINGER XL100 Quantum User Manual
Page 37: 5« 2-color pattern, Position pattern, Repeat pattern
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Enlarge pattern.
1. Select pattern.
2. Press enlarge size key
3. Begin sewing.
3.
Reduce pattern.
1. Select pattern.
2. Press reduce size key
3. Begin sewing.
4» Mirror pattern
1. Select pattern. ____
2. Press mirror key iXi .
3. Begin sewing.
* Pattern can also be enlarged or reduced.
5« 2-color pattern
These illustrated patterns can be sewn in two colors. This
unique technique is achieved by placing a different color
thread in bobbin than needle thread. Bobbin thread color is
sewn on right side of fabric, thereby sewing pattern in two
different colors.
On machine as shown on inside of top cover grey area of
pattern will be sewn with bobbin thread.
* Press 2-color pattern key IcTiJ.
6. Position pattern
In position pattern mode, machine is capable of changing
position of each pattern.
1. Select pattern.
2. Press position key
Continue to press position key to select from among
6
different positions as shown on upper LCD window.
3. Begin sewing.
4. Machine will continue to sew pattern until machine is
stopped.
NOTE:
This is a repeat function and cannot be entered
into memory.
7.
Repeat pattern.
1. Select pattern.
2. Press repeat key
3. Begin sewing.
R P T
stopped.
NOTE:
To finish sewing to the end of patter
repeat key again.
Machine will stop sewing at end of pattern.
y
35