Attaching buttons, Press thread cutting 3 button, trim thread, Лллал – SINGER XL100 Quantum User Manual
Page 32: Шш d.uis
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching Buttons
1
Use correct presser foot.
2
Lower feed dogs.
3
Select zigzag stitch pattern.
The Zigzag stitch is
used to attach both 2
and 4-hole buttons.
The button-sewing foot
must be attached when
sewing a button.
U ®
X
Í
©/
4
у
I ''
Ж
i=5-----,
Up Down Cl
^ у
7SS \
J
ЛЛЛАЛ
X X
[■SA
штА
....
XX
Авто
шш
D.UIS
supplied in accessory bag.
Place fabric on machine, and
Press stitch width buttons to match holes in
button to be sewn.
NOTE:
3.0 mm width will generally sew all size
buttons.
Turn handwheel by hand to confirm
that needle exactly enters holes in
button.
6 Tack thread in place.
Press back tack button to
tacking stitches to secure,
sew 5
Slowly press on speed
controller allowing needle to
7
sew 8 to 10 stitches.
8
Press reverse stitch button to sew 5
or 6 tacking stitches.
Press thread cutting
3 button, trim thread.
Caution:
Due to irregular shape of some buttons button foot may not clamp securely.
Do not attempt to sew these or buttons with a shank using sewing machine.
30