Embroidery, A caution, I to obtain neatly-finished embroidery – SINGER XL100 Quantum User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up machine to embroider
Precautions to be taken when embroidering.
1. Be sure to turn OFF power to machine before attaching/
removing embroidery bed and embroidery card to/from
2. Be sure to keep embroidery cards in original case for
3. Do not carry main unit of sewing machine with embroidery
* When embroidery bed is used with sewing machine, foot
speed controller cannot be used.
presser foot (J).
Tighten presser foot screw securely with exclusive
Lift presser foot and attach
^ (see below for details)
Set lever of embroidery
bed to the rightmost posi-
O tion. (see below)
I To obtain neatly-finished embroidery
Needle thread ^
Use good quality thread designed for
sewing machine embroidery.
White 100% Polyester lightweight 80
to 100 weight
Type of needle
Singer red band woven size 11/80 or
' To embroider difficult-to-feed materials such as light-weight
materials and elastic materials, adhere a piece of temporary-
sticking type of fusible interfacing (non-woven fabric), using an
iron (temperatureilow to medium) on wrong side of material.
■ Placing embroidery bed in position.
Slide embroidery bed O
to right. Push lever 9 to
1 Remove auxiliary bed. 2 right.