1 overcast material, and fold edge, For blindstitching light-weight fabrics, 1 fold the fabrics – SINGER XL100 Quantum User Manual
Page 31: Position folded edge against 2 guide and sew, 3 turn fabric i, How to adjust guide of blindstitching presser foot, If stitches cover folded edge too much, For blindstitching light-weight fabrics 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For blindstitching general fabrics or heavy-weight materials
1
Overcast material, and fold edge.
Position folded edge against
2
guide and sew.
3
Turn fabric over.
Refer to page 25 for overcasting.
Refer to page 28 for basting stitch.
For blindstitching light-weight fabrics
1
Fold the fabrics.
Position folded edge against
2 guide and sew.
3
Turn fabric i
_ ,
Fabric
Fabric
(wrong side)
j
(right side)
s
-
r
How to adjust guide of blindstitching presser foot
• If stitches fail to reach folded edge:
• If stitches cover folded edge too much:
Turn screw counter clockwise.
This will move guide to right.
Place folded edge snugly
against repositioned guide.
You also may adjust stitch width to achieve a perfect blindstitch.
This will move guide to left.
Place folded edge snugly
against repositioned guide.
29