Optional accgssorigs machine or injury, Ruffler presser foot (pan no.saeoas), Attaching ruffler – SINGER XL100 Quantum User Manual
Page 54: Ruffling, Optional accgssorigs, Ruffler presser foot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
* Always use Singer genuine accessory feet.
^
. I -
> Off brand or generic accessories may cause poor performance, damage to sewing
Optional ACCGSSOriGS
machine or injury.
Ruffler presser foot
(Pan No.saeoas)
Ruffler quickly & easily produces
professional looking ruffles on
garments and home decorating.
Attaching ruffler.
' Be sure to turn power off before Select straight stitch pattern and
removing/attaching ruffler
adjust needle position to 1.0 (This is
presserfoot.
very important).
® Remove presser foot.
@ Raise needle bar to highest position.
(D Fit ruffler fork onto needle clamp screw and attach to presser bar.
® Tighten presser foot screw with exclusive screwdriver.
Ruffling.
*Note:
Sew test swatch before sewing on project.
(
1
) Determine number of ruffles.
(2) Adjust overlapping width of ruffles.
Straight
stitch
• Ruffles
every
stitch.
• Ruffles
every six
stitches.
• Ruffles
every
12
stitches.
Ruffle overlap
width increases.
Ruffle overlap
width decreases.
(3) Place fabric under ruffler foot.
®
(4) Lower ruffler presser (5) Lightly push cloth feed plate towards
foot.
O
-........ Fabric
'< edge
badk of machine.
(
6
) Turn handwheel counter clockwise to
lower needle into fabric until fabric begins
to fold.
(7) Start Sewing.
Through 25mm
52