Four direction sewing, Balancing shape of pattern, Press pattern category 1 button – SINGER XL100 Quantum User Manual
Page 33: 2 press trial sewing pattern . 3 begin sewing, 4 completion, How to adjust right side up 4-1 stitching, How to adjust right side down, Four direction sewing balancing shape of pattern, Œi ii, Idcas!^)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Four Direction Sewing
1
Press LGE motif button
Select desired
2 pattern.
3
Use correct presser foot.
These four stitches
allow sewing sideways
(Zigzag/Straight stitch)
and forward or
backward, without
pivoting the fabric.
Follow steps
O
through
O
cs*
I r )
> )
iDCaS!^)
o
O
o
ŒI
II
|VW|
Balancing Shape Of Pattern
It is recommended that a test sample of pattern be sewn using same fabric and interfacing or backing before sewing on garment.
Depending on type of material, its finish, thickness and interfacing used, shape of pattern may be altered. If pattern is out of
shape sew trial sewing pattern to balance machine.
Press pattern category
1 button.
2
Press trial sewing pattern .
3
Begin sewing.
g
A-B-C
LGE
FUN
REG
When stitch length displays (— ), pattern
may be adjusted with stitch balance control.
(Except basting stitches)
4
Completion
Machine may be balanced with trial sewing
pattern from any touch-screen.
Correct balance
Horizontal
This will balance
all applicable
patterns in
machine.
NOTE:
Trial sewing pattern may
also be used for darning.
How to adjust right side up
4-1
stitching
How to adjust right side down
4-2 stitching
Incorrect balance
I. -K-
side
P
Turn stitch balance control up.
Turn stitch balance control down.
31