SINGER XL100 Quantum - Manual (Page 42)

How to Correct Patterns in Memory
Liquid crystal display window When an undesired pattern has been
placed in memory.
• button will operate only when
button has been pressed.
• Pressing button will clear
patterns which have been selected.
• Memory of undesired patterns will be
cleared in order from pattern which was
selected last.
• Continue to press button and
all patterns which have been selected
will be cleared one at a time.
• Turning power switch off, or selecting
utility pattern button will clear all
data In memory.
• To clear reduced size or mirror pattern
press modifier key again.
When last selected pattern that
A has been placed in memory is not
IP a desired one.
last pattern will be deleted.
2. Select correct letter (C.)
3. Press Pml button.
ABC
XX lE Tj(3>a W
•—
AUTO
1^403530252015». . . . 5 . . . . 0 < S )
E p ' j u '
''’V j
Up Q r
Li,,
\A .'x
^7 B q
Tlx
1
.p.
o
'-^’4
c o r r '
MEM,
,RPT ,
8p
MEMjj
^ lA-B-Cl
REG
I I
EMB
to©
EMB
When an undesired pattern is
selected in middle.
I
L______ - _ _ J
are the desired patterns.
I------------ 1
are selected by mistake.
► When memory is not full, it will be
indicated on LCD and patterns may
continue to be added.
• Before selecting a new set of patterns,
be sure to clear all memorized patterns.
Memory Capacity Indicator (^) will not
show on LCD.
» 40 patterns can be stored in memory.
Memory Capacity Indicator Pointer ^
indicates how much space is available
in memory.
Indicated on
upper LCD window
1. Press button twice.
2. Press key and button.
■=>
3. Press iSfi? key and select
WcM
correct letter (B.)
4. Press ^IBU button.
/
5. Press button twice.
■=>
EC
f
G
|" bc
ABC_