Straight stitch, Seiect straight 1 stitch pattern, 2 use correct presser foot – SINGER XL100 Quantum User Manual
Page 24: Position material, and lower presser, 3 foot, 4 begin, Sewing, 5 lightly hold material, Cut thread, 6 adjust sewing speed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
straight stitch
When power is turned on, full left position straight stitch is automatically selected. To move needle position see page 15 or 23.
a
-Automatic needle position
(Left needle position)
Seiect straight
1 stitch pattern.
2
Use correct presser foot.
Position material, and lower presser
3
foot.
4
Begin sewing.
Use presser foot bearing symbol
indicated on LCD.
* See page 8 for how to attach presser
foot.
5
Lightly hold material.
force to material while sewing.
Cut thread.
(For automatic thread cutter see
8 page 14.)
Place edge of material under presser
foot.
Pull upper and bobbin threads to rear of
machine and lower presser foot.
6 Adjust sewing speed.
Lift presser foot and remove
9
material.
22