Darning/ free-motion embroidery, 3 select zigzag stitch pattern, Set embroidery hoop in 6 place – SINGER XL100 Quantum User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Darning/ Free-motion Embroidery
Remove presser foot
1 holder.
Move drop feed lever from
2 up to down.
' Before removing presser
foot holder, be sure to turn
off power to sewing
machine.
3
Select zigzag stitch pattern.
-------
XX
A
'
yoc
U T O
-
AWV\
M
cn
D.U
4
Select stitch width.
Set stitch length to 4.0 to
5
increase thread suppiy.
Set embroidery hoop in
6 place.
Lower presser foot lifter and start
sewing.
NOTE:
It is possible to sew without embroidery hoop if optional Darning/Embroidery foot is used.
See page 53 for further information.
46
Advertising