Circular pattern stitch, Attach circular pattern 3 stitching ruler, Move sizing plate to 5 desired position – SINGER XL100 Quantum User Manual
Page 44: Push sizing lever into 6 slot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Circular Pattern Stitch
sewing outside
periphery of coasters
and emblems.
Circular ruler allows
machine to sew circular
patterns of 3 to 10 cm
radius.
Attach circular pattern
3 stitching ruler.
Left-hand side:
Suited to sewing of large circular
patterns
Move sizing lever by
firmly pushing from
4 slot.
Right-hand side;
■ Suited to sewing of small
circular patterns
Attach circular pattern stitching
ruler to left- or right-hand side of
Needle plate using screw supplied
with machine.
Select pattern as
1 desired.
Select patterns from
I
RK
I
category.
If single pattern is selected
press
I
Rpj key.
Move sizing plate to
5 desired position.
Attach decorative stitch
2 foot (T).
Push sizing lever into
6 slot.
Place material on machine and
hold in position using tack sup-
7 plied with machine.
42