Automatic buttonholes, Select desired style and 1 size buttonhole, 4 place button in buttonhole foot – SINGER XL100 Quantum User Manual
Page 28: 5 remove button, Mark buttonhole 6 positions, Automatic buttonholes ,27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Buttonholes
When sewing knit or other
stretchy materials, apply
interfacing to the material, and
set presser foot pressure
adjustment lever to “LOW”.
Be sure to sew a test
buttonhole first.
Automatic stitch length
(density) is 0.5 for bartack
buttonholes and 0.6 for
keyhole buttonhole. Adjust
buttonhole density by
adjusting stitch length (see
page 17).
Automatic buttonhole foot has an underplate for sewing
perfect buttonholes along edge of garments where fabric
layers are not equal. Underplate may be removed for
special applications such as a double-breasted coat.
For sewing small buttonholes on light
weight fabric
For sewing small buttonholes on light
to medium weight fabric
For sewing large buttonholes on
medium to heavy weight fabric
For sewing large buttonholes in thick
or heavy weight fabrics
Select desired style and
1 size buttonhole.
2
Change foot.
3
Position Needle and Bobbin threads.
bobbin thread between buttonhole foot and
underplate.
4
Place button in buttonhole foot.
5
Remove button.
Mark Buttonhole
6 Positions.
Button slide
After placing button in presser foot,
push slide to set buttonhole length.
Note:
When sewing buttonholes be sure to support the weight of the garment
26