ADLINK PCI-8134A - Manual (Page 19)

Installation
• 9
Figure 2.2 PCB Layout of the PCI-8134A
CN1: External Power Input Connector
CN2: Input / Output Signal Connector
CN3: Manual Pulser Signal Connector
CN4: Simultaneous Start / Stop Connector
J1-J8: Pulse output type selection
S1: Polarity of end-limited switch selection
2.3
Hardware Installation
2.3.1 Hardware configuration
The PCI-8134/PCI-8134A has a plug and play PCI controller on board. The
memory usage (I/O port locations) of the PCI card is assigned by system
BIOS. The address assignment is done on a board-by-board basis for all
PCI cards in the system.
2.3.2 PCI slot selection
Your computer will probably have both PCI and ISA slots. Do not force the
PCI card into a PC/AT slot. The PCI-8134/PCI-8134A can be used in any
PCI slot.
CN4 CN3
CN2
CN1
J1
|
J8
S1