8 velocity profile selection, 9 repeat mode, Velocity profile selection – ADLINK PCI-8134A User Manual
Page 84: Repeat mode
Advertising
74
• Motion Creator
5.3.8
Velocity Profile Selection
: Click T_Curve or S_curve to select preset movement velocity profile. The
relative parameter settings are in Motion Parameter Frame.
5.3.9
Repeat Mode
: Repeat mode is only for absolute and relative mode. After choosing a
operation mode and click repeat mode on, you can press play key to make
axis run between position 1 and 2 (in absolute mode) or run between a
range (relative mode). It is useful on demonstrations. Use Stop button to
stop this operation.
Advertising