ADLINK PCI-8134A - Manual (Page 89)

Function Library
• 79
Type Name Description Range
U8 8-bit ASCII character 0 to 255
I16 16-bit signed integer -32768 to 32767
U16 16-bit unsigned integer 0 to 65535
I32 32-bit signed long integer -2147483648 to 2147483647
U32 32-bit unsigned long integer 0 to 4294967295
F32
32-bit single-precision floating-
point
-3.402823E38 to 3.402823E38
F64
64-bit double-precision floating-
point -1.797683134862315E308 to
1.797683134862315E309
Boolean Boolean logic value TRUE, FALSE
6.3
Initialization
@ Name
W_8134_Initial – Card Initialization
W_8134_InitialA – Another Card Initialization Method
W_8134_Close – Card Close
W_8134_Set_Config – Configure Card according to Motion Creator
W_8134_Get_IRQ_Channel – Get the card’s IRQ number
W_8134_Get_ Base_Addr – Get the card’s base address
@ Description
W_8134_Initial:
This function is used to initialize PCI-8134 card. It has to be initialized by
this function before calling other functions. The parameter definitions of
this function are different from OS. Please pay attention it.
W_8134_InitialA:
This function is like above one. The only difference is parameter
definition. We suggest that users use this function for card
initialization because this function is OS independent.
W_8134_Close:
This function must be called before the program ends.
W_8134_Set_Config:
This function is used to configure PCI-8134 card. All the I/O
configurations and some operating modes appeared on “Axis
Configuration Window” of Motion Creator will be set to PCI-8134. Click
“Save Configuration” button on the “Axis Configuration Window” if you
want to use this function in the application program. Click “Save
Configuration” button will save all the configurations to a file call
“8134.cfg”. This file will appear in the Windows’ system directory.
W_8134_Get_IRQ_Channel :