ADLINK PCI-8134A - Manual (Page 79)

Motion Creator
• 69
5.3
Axis Operation Windows
Press the “Operate Axis” button on the Main Menu or Axis Configuration
Menu will enter the Axis Configuration window. Figure 5.3 shows the
window. User can use this window to command motion, monitor all the I/O
status for the selected axis. This window includes the following displays and
controls:
• Motion Status Display,
• Axis Status Display
• I/O Status Display
• Set Position Control
• Operation Mode Control
• Motion Parameter Control
• Play Key Control
• Velocity Profile Selection
• Repeat Mode
5.3.1 Motion Status Display
The Motion Status display provides a real-time display of the axis’s position
in the Command, Actual, Error fields. Motion Creator automatically updates
these command, actual and error displays whenever any of the values
change.
When Pulse Input Active property is Axis Configuration Window is set to
Enable, the Actual Position read will be from the external encoder inputs
(EA, EB). Else, it will display the command pulse output when set to Disable.
5.3.2 Axis Status Display
The Axis Status display provides a real-time display of the axis’s status.
It displays the status (Yes (for logical True) or No (for logical False)) for In
Position or In Motion or displays there is Interrupt Events Occurs. When In
motion, you can check the motion done status in the next column. In
Position range can be specified in the Pos_Err column.
5.3.3 I/O Status Display
Use I/O Status display to monitor the all the I/O status of PCI-8134/PCI-
8134A. The Green Light represents ON status, Red Light represents OFF
status and BLACK LIGHT represents that I/O function is disabled. The