Operations, 1 motion control modes, Motion control modes – ADLINK PCI-8134A User Manual
Page 41: 4operations
![background image](/manuals/733470/41/background.png)
Operations
• 31
4
Operations
This chapter describes detailed operation of the PCI-8134/PCI-8134A card.
Contents of the following sections are as following.
Section 4.1: The motion control modes
Section 4.2: The motor driver interface (INP, ERC, ALM, SVON, RDY)
Section 4.3: The limit switch interface and I/O status (SD, EL, ORG)
Section 4.4: The encoder feedback signals (EA, EB, EZ)
Section 4.5: Multiple PCI-8134/PCI-8134A cards operation.
Section 4.6: Change Speed on the Fly
Section 4.7: Interrupt Control
4.1
Motion Control Modes
In this section, the pulse output signals’ configurations, and the following
motion control modes are described.
•
Constant velocity motion for one axis
•
Trapezoidal motion for one axis
•
S-Curve profile motion for one axis
•
Linear interpolation for two axes
•
Home return mode for one axis
•
Manual pulser mode for one axis