ADLINK PCI-8134A - Manual (Page 72)

62
• Operations
Relative Function:
v_change(): Refer to section 6.5
4.7
Interrupt Control
The PCI-8134/PCI-8134A motion controller can generate INT signal to host
PC according to 13 types of factors, refer to set_int_factor() function for
more details.. The INT signal is output when one or more interrupt factors
occur on either axis. To judge on which axis the interrupt factors occur, use
get_int_axis() function. The interrupt status is not closed until
get_int_status() function is performed.