ADLINK PCI-8134A - Manual (Page 73)

Motion Creator
• 63
5
Motion Creator
After installing all the hardware properly according to Chapter 2, 3,
configuring cards and checkout are required before running. This chapter
gives guidelines for establishing a control system and manually exercising
the PCI-8134/PCI-8134A cards to verify correct operation. Motion Creator
provides a simple yet powerful means to setup, configure, test and debug
motion control system that uses PCI-8134/PCI-8134A cards.
Note that Motion Creator is available only for Windows XP/7 with the screen
resolution higher than 800x600 environment and can not run on DOS
system.