ADLINK PCI-8134A - Manual (Page 90)

80
• Function Library
This function is used to get the PCI-8134 card’s IRQ number.
W_8134_Get_Base_Addr :
This function is used to get the PCI-8134 card’s base address.
@ Syntax
C/C++ (DOS)
U16 _8134_Initial (U16 *existCards, PCI_INFO *info)
U16 _8134_Close(U16 cardNo)
U16 _8134_Set_Config(char* filename)
C/C++ (Windows)
U16 W_8134_Initial(U16 *existCards, PCI_INFO *pciInfo)
(Windows 9x Only)
U16 W_8134_Initial( I32 cardNo) (Windows NT/2K/XP)
U16 W_8134_InitialA(I16 *Totalcard) (All Windows)
U16 W_8134_Close( I32 cardNo) (All Windows)
U16 W_8134_Set_Config(char *fileName)
void W_8134_Get_IRQ_Channel(U16 cardNo, U16 *irq_no )
void W_8134_Get_Base_Addr(U16 cardNo, U16 *base_addr )
Visual Basic (Windows)
W_8134_Initial (existCards As Integer, pciInfo As
PCI_INFO) As Integer (Windows 9x Only)
W_8134_Initial (ByVal cardNo As Long) As Integer
(Windows NT/2K/XP)
W_8134_Close (ByVal cardNo As Long) As Integer
(Windows NT/2K/XP)
W_8134_Set_Config (ByVal fileName As String) As
Integer
W_8134_Get_IRQ_Channel (ByVal cardno As Integer,
irq_no As Integer)
W_8134_Get_Base_Addr (ByVal cardno As Integer,
base_addr As Integer)
@ Argument
existCards: numbers of existing PCI-8134 cards
info: relative information of the PCI-8134 cards
cardNo: The PCI-8134 card index number.
filename: A configuration file from MotionCreator
irq_no: The card’s IRQ channel number
base_addr: The card’s base address
@ Return Code
ERR_NoError
ERR_BoardNoInit
ERR_PCIBiosNotExist
6.4
Pulse Input / Output Configuration