Doremi ShowVault / IMB - Manual (Page 25)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 25 of 146 Version 1.5
Doremi Labs
4 ShowVault IP Address
All ShowVault servers are shipped with a default IP address of 192.168.100.50 on the Ethernet
port (Eth1) and a DHCP assigned dynamic IP address on the Ethernet port (Eth0)
– see section
3.3 to locate each Ethernet connector.
To change the IP address of the ShowVault server, go to M
enu → System → Networking
Configuration and follow the steps below:

A window will appear asking for a password as illustrated below (Figure 17):
Figure 17: Authentication Windows

Follow the steps according to the Ethernet Networking Configuration Wizard (Figure 18):
Figure 18: ShowVault Network Configuration

Press Enter to confirm the configuration of each page of the Ethernet Networking
Configuration Wizard. Press Tab to select an option.
 Enter the desired system’s hostname and then press Enter.
o Note: It is a good idea to put the circuit location/screen number in here. For
example, “AMC_bir_scr1,” as it will be easier to identify when connecting via
VNC and in the logs.

Enter the desired system domain name and then press Enter.
System hostname -
dcp2000 used as an
example