Doremi ShowVault / IMB - Manual (Page 61)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 61 of 146 Version 1.5
Doremi Labs
6.3.2 Trigger Cue Saving

Repeat the Trigger Cue creation operations for all the Trigger Cues are created and click
the Save button.

The user will be asked for a password to be able to perform the operation (Figure 67).
Figure 67: Authentication Window

Enter the appropriate password and click the Ok button.

The Trigger Cues will then be available within CineLister in order to be included in a
Show Playlist.
Note: The saving operation will not only save the Trigger Cues, but also the Macro Automation
Cues that were created according to the procedure described in Section 6.2.
6.4 Pre-defined Macro Usage
If the user has a pre-defined macros.xml file containing automation and trigger cue definitions,
then copy it into the /doremi/etc/ folder and the corresponding macros will be visible in the
Macro Editor GUI. The user will then be able to update the cues, if needed, from the Macro
Editor GUI.
6.5 Default Cues
The default_cues.xml file can be used to load an automation and trigger cues playlist prior to
any playback. This is to avoid having to add a Fire Alarm trigger cue to each show. If the user is
provided a default_cues.xml file, copy it into the /doremi/etc/ folder.
6.6 Startup Scripts

Copy the script to be executed automatically at boot in the following folder:
/doremi/etc/rc.d/