Doremi ShowVault / IMB - Manual (Page 94)

____________________________________________________________________________________
SHV.OM.001293.DRM Page 94 of 146 Version 1.5
Doremi Labs
11.2 Server LCD Screen Maintenance (3RU only)
This section provides the required steps for when the server front panel LCD screen needs
recalibration.
11.2.1 Server LCD Screen Calibration
Verify that the stylus on the server front panel LCD screen functions as a mouse. Check to see
if the server LCD screen VGA connector is linked to the motherboard VGA connector as
presented in Section 3.1.

Go to Menu → System → Touchscreen Calibration.

Using the stylus located on the left side of the server LCD screen press on the four
blinking dots one after the other as shown below. There is one dot in each screen
corner.
(a) (b)
Figure 98: Server LCD Screen Calibration
First Blinking Dot