Paxton Superchargers Ford Mustang GT User Manual
Page 44
P/N: 4809654 v5.0
©2010 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
24
6. Disconnect the connectors on the parking
and the lower fog lights. (See Fig. 8A-e.)
7. Remove the six nylon clips retaining the
upper radiator core support cover. (See
Fig. 8A-f.)
8. Remove the two 10mm headed bolts (1
each side upper portion of grill). (See Fig.
8A-g.)
Fig. 8A-e
Fig. 8A-g
Fig. 8A-f
NYLON
CLIPS
10mm HEADED
BOLT
LIGHT
CONNECTIONS
8A. BUMPER CovER & SPLASH PAN
REMovAL
(H.o. kits only), cont’d
10. Pull out on the bumper cover
11. Remove the connectors to the driving
lights in the grill. (See Fig. 8A-h.)
12. Remove the bumper cover and set aside.
(See Fig. 8A-i.)
13. (2010 Models only) Remove air diversion
panels on both sides of the radiator by
removing nylon push pins. Set them aside
for trimming in a future step. (See Fig.
8A-j).
9. Lift up on the tabs releasing them from the
clips. (See Fig. 8A-h.)
Fig. 8A-h
DRIVING
LIGHT
CONNECTOR