Paxton Superchargers Ford Mustang GT - Manual (Page 64)

P/N: 4809654 v5.0
©2010 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
44
Fig. 8L-a
Fig. 8L-b
Fig. 8L-c
8L. ENGiNE CooLANT RESERvoiR
iNSTALLATioN (2007-2010 Model H.o. kits
only)
1. Locate assembly 8N155-082.
2. Attach the rear reservoir mounting bracket
4FU010-091 to the reservoir with the 1/4-
20 x 1/2" long bolts and washers provid-
ed. (See Fig. 8L-a.)
3. Attach bracket 4FU010-061 to the front of
the reservoir with the hardware provided.
(See Fig. 8L-b.)
4. Locate and install 1/4"NPT x 3/8" barbed
fitting in the tapped hole just above the
previously installed mounting bracket.
This hole may have to be opened using
the appropriate drill bit. (See Fig. 8L-c.)
4FU010-
091
RESEVOIR
BRACKET
8N055-080
OVERFLOW
TANK