Paxton Superchargers Ford Mustang GT - Manual (Page 79)

P/N: 4809654 v5.0
©2010 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
59
I. Locate the supplied fuel pump and pump inlet
screen. Attach the pump inlet screen to the
pump and orient exactly as shown. (See Fig.
13-f.)
J. Secure the supplied fuel pump to the side of the
factory pump assembly using the #44 hose
clamp supplied. Verify that the hose clamp is
routed inside of the metal posts so that they can
be pushed down without restriction. (See Fig.
13-f.)
K. Slide the two supplied .75" long teflon sleeves
over the discharge of each fuel pump. (See Fig.
13-g.)
H. Using the supplied 17.0 stepless clamps and
2.75" length of Ø3/8" rubber hose, connect sup-
plied “Y” fitting to the distribution rail. (See
Fig. 13-e.)
Fig. 13-e
Fig. 13-f
Fig. 13-g
Y-FITTING
PUMP INLET
SCREEN
#44 HOSE
CLAMP
SUPPLIED
.75" LONG
TEFLON
SLEEVES
13. FUEL PUMP UPGRADE, cont’d