Paxton Superchargers Ford Mustang GT - Manual (Page 77)

P/N: 4809654 v5.0
©2010 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
57
Q. MAF Interface Adapter (MAFia) Installation
(H.O. kits only)
1. Locate the MAFia box.
2. Plug the MAFia between the factory MAF
connector and the MAF sensor.
3. Remove the small red cover in the middle
of the supplied MAFia box.
4. Verify that the MAFia box is set on num-
ber “2”.
5. If you find that the MAFia box in not set,
use the tool that is provided with the
MAFia box and set to number “2”.
6. Replace the cover and secure the MAFia
box away from hot or moving parts with
nylon ties.
7. An ideal location for mounting the MAFia
box is on the shock tower secured with
wire ties or double sided tape.
*** NOTE ***
It is critical that the MAFia box be set on number “2”,
The calibration that is provided with this kit has been
created to work at this setting. Any change to the
MAFia box by setting it to a higher or lower number
could cause damage to the engine.
12. AiR iNLET ASSEMBLy, cont’d