Paxton Superchargers Ford Mustang GT - Manual (Page 45)

P/N: 4809654 v5.0
©2010 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
25
8A. BUMPER CovER & SPLASH PAN
REMovAL (H.o. kits only), cont’d
Fig. 8A-i
Fig. 8A-j
Fig. 8A-k
13mm HEADED
BOLTS
NYLON PUSH
PINS
15. Remove four inner bolts of eight 13mm
headed bolts retaining the metal bumper
support. (See Fig. 8A-k.)
14. Remove four nylon push pins from the
styrofoam bumper support and set the
support and the pins aside to be rein-
stalled. (See Fig. 8A-j.)
Fig. 8A-l
SPACERS
PROVIDED
18. Replace the styrofoam bumper support using
the factory retainers.
AIR DIVERSION
PANELS
16. Replace the bolts previously removed with
the four 8mm-1.25" x 35mm long bolts
and washers provided.
17. Install the four 2A017-036 spacers (two
each side) to the bolts. (See Fig. 8A-l).