Wavetronix SmartSensor HD (101-0415) - User Guide - Manual (Page 12)

In this chapter
˽ Selecting the Mounting Height
˽ Attaching the Mount Bracket to the Pole
˽ Attaching the Sensor to the Mount Bracket
˽ Aligning the Sensor to the Roadway
˽ Applying Silicon Dielectric Compound
˽ Connecting the Cable
1
Installing the SmartSensor HD is quick and easy. Once installed, the SmartSensor HD con-
figures automatically and requires little or no on-site maintenance.
The installation process includes attaching the mounting bracket to the pole; attaching the
sensor to the mounting bracket; aligning the sensor; applying a silicon dielectric compound
to the sensor connector; and connecting the cable to the sensor.
Warning
Do not attempt to service or repair this unit. This unit does not contain any compo-
nents and/or parts serviceable in the field. Any attempt to open this unit, except as
expressly written and directed by Wavetronix, will void the customer warranty. Any
visible damage to exterior seal labels will void the warranty. Wavetronix is not liable
for any bodily harm or damage caused if unqualified persons attempt to service or
open the back cover of this unit. Refer all service questions to Wavetronix or an au-
thorized distributor.
Installing the SmartSensor HD
1