Wavetronix SmartSensor HD (101-0415) - User Guide - Manual (Page 43)

42 CHAPTER 4 • COMMUNICATION
configuration options will become available (see Figure 4.5).
Figure 4.5 – SSMHD Main Screen (connected)
Once connected, you can view additional information about the connection you have estab-
lished by clicking on the moving arrows on the top left of the main screen (see Figure 4.6).
Figure 4.6 – Connection Info Screen
Below is a list of the information available on the Connection Info screen:
˽ Status – Shows that you are connected.
˽ Device – Shows the subnet and sensor ID.
˽ Speed – Shows the baud rate.
˽ Duration – Shows how long you have been connected.
Troubleshooting Connections
If you have problems connecting, use the following steps to find the problem: