Wavetronix SmartSensor HD (101-0415) - User Guide - Manual (Page 55)

54 CHAPTER 6 • LANES
Figure 6.1 – Lanes Screen
Configuration
The Configuration screen can be used to automatically or manually configure the roadway,
manipulate lanes, and control how you see the information onscreen. To reach the screen,
click the Configuration button.
Sensor Alignment
The sensor should be properly aligned before beginning lane configuration, so SSMHD includes
an alignment feature that gives visual confirmation when the perpendicular alignment of a sen-
sor is correct (see Figure 6.2). SSMHD gives you three different ways to check sensor alignment:
the arrow coming out of the sensor; the color on the detected vehicles; and in the sidebar.
Once you open the Configuration screen, you should see alignment arrows. If there are no
alignment arrows, click on the magnifying glass
icon and then select Show Alignment.
Figure 6.2 – Sensor Alignment
Adjust the sensor according to the arrow displayed in the Configuration window. A green