Selecting the mounting height, Caution – Wavetronix SmartSensor HD (101-0415) - User Guide User Manual
Page 13
12
CHAPTER 1 • INSTALLING THE SMARTSENSOR HD
Caution
Use caution when installing any sensor on or around active roadways. Serious injury
can result when installation is performed using methods that are not in accordance
with authorized local safety policy and procedures. Always maintain an appropriate
awareness of the traffic conditions and safety procedures as they relate to specific
locations and installations.
Selecting the Mounting Height
After selecting a mounting location within the recommended range of offsets (see the intro-
duction and Figure 1.1), use Table 1.1 to select a mounting height.
Recommended
Mount Area
1st Point of
Interest
Tilt Angle
35 ft.
25 ft.
30 ft.
26 ft.
Figure 1.1 – Recommended Mounting Height
Offset from first
Detection Lane (ft
/ m)
Recommended
Mounting Height
(ft / m)
Minimum Mount-
ing Height (ft / m)
Maximum Mount-
ing Height (ft / m)
6 / 1.8
12 / 3.7
9 / 2.7
19 / 5.8*
7 / 2.1
12 / 3.7
9 / 2.7
19 / 5.8*
8 / 2.4
12 / 3.7
9 / 2.7
20 / 6.1*
9 / 2.7
12 / 3.7
9 / 2.7
21 / 6.4
10 / 3
12 / 3.7
9 / 2.7
22 / 6.7
11 / 3.4
12 / 3.7
9 / 2.7
23 / 7
12 / 3.7
13 / 4
10 / 3
24 / 7.3
13 / 4
13 / 4
11 / 3.4
25 / 7.6